New Quilling Technique Tutorial - Comb Quilled Two Tone Leaf / Petal

This quilling tutorial is a new technique for making a two color comb quilled or mini-loop leaf . I have not seen these leaves used by anyone else. I have used these leaves for the first time in Floral Cascade and then in my Thai Pongal Card.I developed this technique when playing around with comb quilling and thought I would share it with you all.

This leaf/ petal  can be made freehand or by using a comb. I have given both methods here.  Try to look at the pics and understand the method before reading the instructions.

Comb Method

1

 Take a large comb (use the side with a wider gap between the teeth) and a 3mm strip of your choice and make a loop around the last tooth and glue it shut.

2

 Now thread the strip under the next tooth and bring it back up as shown in the pic above.

3

 Loop it back towards the end of the comb and glue the strip at the very edge with a tiny bit of glue.

4

 Next, fold it forward as shown in the 1st pic above making sure it is aligned on top of the other loops you have made and thread it under the next tooth as shown in the 2nd pic above.

Continue making about 5 to 6 loops (the size and number of loops will depend on the size of the comb. Large combs with more space between the teeth will give you larger leaves).

5

 Remove from comb and leave the balance strip to wrap around the leaf or tear off excess.

6

 Quill another half leaf in another color and get the same number of loops. Then glue them together as shown above then glue another strip you want to use to wrap round the leaf, to the bottom as shown.

7

Now apply a wee bit of glue to the edge of each loop of one color and glue it to the loops of the other color gently and wind the strip around to encircle the leaf.

That it folks!!

 

Manual Method

The leaves made by hand will look less symmetrical like it does in nature. To make sure that the loops of the two halves  are the same sizes both strips should be shaped together.

 Make a loop holding both strips together. Do not paste the strips together.

 Fold the loop forward at the place the loop starts.

Make the second loop so that it overhangs the 1st loop. Size it by using your third finger to push it over the 1st loop as shown.

 Once again fold it forward and create the 3rd loop and push it over the second loop as shown to size it. Continue in this manner till you reach the size of the leaf/ petal you desire.

 Separate the 2 strips and it should look like the pic above.

 Now apply a tad of glue at the top (not the tip) of each fold as shown in the picture and you have made the 2 halves of your leaf/petal.

This is what your half leaves will look like.

 Now glue both the half leaves at the bottom as shown.

 Apply glue to the top of each loop of one of the halves as shown.

Glue the loops as shown to make the leaf. do not squash it. Gently hold them till they get stuck and then encircle the leaf with another strip of your choosing and your done.

Just a tiny request to those of you who use this leaf , please give a link to this blog so that others may learn too.

A Quilled Greeting For Thai Pongal

This post is to wish all my Hindu  visitors Happy Thai Pongal. May you find fulfillment in everything you do. Just as the suns rays shines upon everyone irrespective of nation, cast or creed, may happiness surround you no matter the circumstances.

A closer look at the design

 I have used the Two color half comb leaf here and a rose made from loose coils.

The tutorial for the dual color looped leaf is here.
Quilled Coil Rose tutorial is here.

New Quilling Technique Tutorial - Butterfly-Wing Leaf

New Quilling Technique Butterfly-Wing Leaf

This quilling tutorial is for a butterfly -wing leaf  I created for the Floral Cascade Flower Frame  which was quilled by using a combination of husking and multi strip technique. However pins and cork board are not required as this is a  free hand husking method. 

The variation in this technique is that loops will alternate between short and long loops to achieve the butterfly –wing appearance. Please try to visualize the process by looking at the pictures before you read the instructions as it can be confusing  for those who do not understand what you have to do. 

METHOD

Take two 3mm strips of the same green and score the side with your thumb-nail to curl the strips and glue them together.

Now make a loop upwards with both strips and hold it between the thumb and forefinger as shown on the left picture above, then pull the inner strip down  to create a shorter loop with your other hand while still holding the loop between thumb and forefinger as shown in the right picture, . (Loosen your grip when you pull with the other hand to allow the inner strip to slide down).

 

Now glue the strips together at the bottom and loop it around the bottom to the right, a little shorter than the first loop you created (mid loop)  and pull the inner strip to create a shorter one as before.

Glue the strips at the bottom and once again repeat the process to create a shorter  loop to the left as shown above .

Now create two more   loops to the right and the left which is longer than the short loops but shorter than the mid loop as shown above. (This is in order to get the tapering shape of the leaf).  Glue all the loops by using just a tad of glue at the bottom.

If you have strips left use it to encircle the leaf or use a new strip to encircle the leaf. Make sure you get the shape you require and do not tighten  too much. Glue it after encircling the required number of times. Glue the side loops slightly to the encircling strip to make them firm.

Shape the leaf by pinching the top if required. 

Lo and behold , a butterfly wing like leaf that can be used as petals and butterfly wings !!

Happy Quilling

Basic Quilling - Flower Frame - Floral Cascade

quilled flower frame quilling quilled flowers quilled leaves

This simple quilled  frame of flowers is a break from all that complicated quilling I have been doing for a while. I have used the various basic shapes for the flowers and all these can be made from the Basic Shapes Tutorial  which I had posted earlier.

For the butterfly wing leaf, I have used the  looping technique but I did not use pins as I was taking a break remember?  The tutorial for the comb quilled leaf is here, but if you look carefully this leaf has dark green on one side and light green on the other.

Figured how I did that?? Well I did it in 2 halves and combined the two halves and encircled it. Here have a closer look !!

comb quilling quilled leaf tutorial

So now you know why I used  just 2 comb leaves eh?  Absolute laziness!! Have a go at it, it looks good if you have the patients to use it extensively. Maybe I will too in a later piece.

Tutorials for dual color  looped leaf and butterfly wing leaf are available if u click on the links.

Quilled Picture - Little Robin Red Breast

Quilled Bird Quilled robin Quilled Picture Quilled Art

A quilled picture (bird) of little Robin Redbreast is my first post for the year. I  have quilled birds before starting with a humming bird  with flowers very early into my journey into quilling. I soon followed this up with a  quilled parrot and a feathery discussion which became quite popular with many viewers. Then I quilled Fuchsia Honey Shower which had another humming bird. However All those were quilled with coiled shapes.

For Robin Redbreast, I wanted a lifelike appearance so I adopted a basic shape that looks more like feathers and glued it onto the backing, graphic quilling style. I have also used the proper colors of the actual bird by referring to a photo of the bird.

I quilled the legs using my stem technique for which I have posted a tutorial earlier on. The tree trunk is graphic quilled and the method is given in the tutorial link above.

For the background I have used the less emphasized beehive quilling that I adopted in my Nativity scene. The edging is  done with crimped red strips.

I am very happy with the results as it turned out better than I expected. I hope you like it too. I would love to have your feedback.

Beehive quilling Tips & Tricks are here.